Home › Texas › High Plains › Hale County
Hale County · High Plains
Hale County Foundation Repair: Soil and Climate
Hale County foundation repair is shaped by the clay subsoil under Pullman and Olton loams, which together cover about 69% of the county between Lubbock and Amarillo. Rated by that clay layer, about 80% of Hale County is high-swell ground, even though the surface soil looks mild. Rain averages only about 19 inches, but summer storms on flat farmland soak that layer hard.
- Guides by Brad Stevens, 20 years in Texas foundation repair
- Lifetime transferable warranty on partner pier work
- Free inspection and a written estimate, no pressure
Get a free foundation inspection
Tell us what you’re seeing. We’ll call you back, usually the same business day.
Repairs are performed by independent, vetted partner contractors. Your details go only to the one contractor we match you with.
The short answer
How expansive is the soil in Hale County?
The surface is moderate, the subsoil isn’t. Pullman covers about 51% of the county and Olton about 19%, and both have clay layers rated high. About 80% of the county is high-swell by worst layer. Lofton, in playa areas, rates high throughout. Rain averages about 19 inches.
Reviewed by
Brad Stevens
Owner, Texas Tough Foundation Repair · 20 years in Texas foundation repair · Updated November 2026
Clay subsoil across a flat county
Hale County is entirely High Plains. Pullman covers about 51% of it, with a plasticity index around 26, and Olton about 19%. Both rate moderate across their full depth, but their clay layers rate high. That’s why the card shows about 10% high-swell while the worst-layer figure is about 80%, one of the highest in the region. Estacado and Acuff, smaller shares, are milder.
Lofton, about 4% of the county, is the soil of playa basins and their rims and rates high throughout. The Plainview station records about 19 inches of rain a year. On flat lots, water from a summer downpour stands for hours or days and soaks the subsoil exactly where a slab’s grade beam sits. Then a dry spell pulls it back out.
Soil card · Hale County
High-swell ground
10%
of county land in high or very high shrink-swell soils; 80% when the clay subsoil layer alone is counted
Annual rain
19.3 in
NOAA 1991–2020 normal, Plainview
Dominant soil
Pullman
plasticity index 26
Pullman
51% of the county · plasticity index 26
Moderate swell
Olton
18% of the county · plasticity index 24
Moderate swell
Estacado
6% of the county · plasticity index 21
Moderate swell
Lofton
4% of the county · plasticity index 30
High swell
Sources: USDA NRCS Soil Survey (SSURGO), NOAA climate normals. How we use this data
Homes by age · Hale County
Median home built 1969
Built before 1960
27%
Built 1960–1979
43%
Built 1980–1999
21%
Built 2000 or later
9%
Source: U.S. Census Bureau, American Community Survey 5-year estimates.
Hale County Foundation Repair homes by age
About 43% of Hale County’s homes were built between 1960 and 1979, and about 27% before 1960. The median is 1969. Only about 9% went up in 2000 or later.
Most of those homes are slabs that predate post-tensioned construction, sitting on clay that has cycled for fifty years or more. Brick cracks and sticking doors are common, and so are old drain lines under the slab. For the county seat’s own soil and housing data, see foundation repair in Plainview.
A sound repair on Hale County clay
Pressed concrete or steel piers driven through the clay layer to firmer ground stabilize a settled slab. The estimate should name the pier type and count and say what happens if piers go deeper than planned. Drainage belongs in the same plan. Gutters, long downspout extensions and grading that sheds water keep the subsoil from cycling as hard.
For budgeting, the statewide ranges hold: about $3,300 to $7,000 for a few piers and about $4,000 to $6,000 for a typical moderate repair. See the foundation repair cost guide.
Hale County search results include a few local foundation companies and several directories. Coverage of farm homes and smaller towns away from Plainview varies, so Texas Tough will tell you straight whether a vetted partner contractor works your area. The High Plains guide covers the wider region.
Signs common on Hale County clay
- Doors that bind after summer storms
- Cracks in brick that open in dry months
- A low corner near a downspout or garden bed
- Cracked floor tile across the middle of a slab
- Water that stands on the lot after rain
The Texas Tough Method
How Texas Tough works with you
01
Tell us what you're seeing
Call or send photos. We help sort cosmetic from structural first.
02
Free, no-pressure inspection
A vetted local partner measures the house and writes up an estimate.
03
Read the estimate with us
Pier count, pier type, drainage and warranty terms in plain English.
04
Repair and follow-up
Pier work carries a lifetime transferable warranty, and we check in afterward.
Repairs are performed by independent, vetted partner contractors. How it works
Questions locals ask
Hale County foundation repair FAQ
Is Hale County soil expansive?
Below the surface, yes. Pullman and Olton cover about 69% of the county, and their clay layers rate high for shrink-swell. About 80% of Hale County is high-swell by worst layer.
Does living near a playa matter for my foundation?
It can. Playa basins and their rims are often mapped as Lofton, which rates high-swell through its whole depth, and they collect runoff after storms. Mention it to the inspector.
Are piers considered a permanent foundation?
Piers driven to firm bearing below the active clay are meant to be permanent, and partner pier work carries a lifetime transferable warranty. On Hale County’s clay, drainage still has to be right for the repair to hold.
How much does a foundation inspection cost in Texas?
A partner inspection through Texas Tough is free and comes with a written estimate. An independent structural engineer usually charges $500 to $1,200 if you want a second opinion.
Not sure if it's serious?
In Hale County? Get a straight answer.
Call Texas Tough and describe what you’re seeing. If it’s minor, we’ll say so. If not, we’ll tell you whether a vetted partner covers your area and set up a free, no-pressure inspection. Repairs are performed by independent, vetted partner contractors.