Taylor · Williamson County

Foundation Repair in Taylor, TX

Foundation repair in Taylor is different from the rest of Williamson County, because Taylor is an old Blackland Prairie town in a county of new suburbs. About a quarter of its homes were built before 1960, against about 2% county-wide, and roughly three quarters of the city is high or very high swell clay. Texas Tough helps you understand what you’re seeing, then connects you with a vetted local contractor for a free, no-pressure inspection.

Get a free foundation inspection

Tell us what you’re seeing. We’ll call you back, usually the same business day.

Repairs are performed by independent, vetted partner contractors. Your details go only to the one contractor we match you with.

The short answer

Why do Taylor homes have foundation problems?

Taylor sits on deep Blackland clays like Branyon, Burleson and Heiden, which swell and shrink hard with the seasons. Its housing is old for the area, with a median year built of 1979 and many pre-1960 pier and beam homes. Decades of wet and dry cycles wear on old supports and older slabs alike.

Reviewed by

Brad Stevens

Owner, Texas Tough Foundation Repair · 20 years in Texas foundation repair · Updated November 2026

Deep black clay under the whole town

Branyon is Taylor’s most common soil at about 30%, a deep, dark prairie clay with very high swell and a plasticity index around 42. Burleson, about 25%, is a high-swell clay with a plasticity index near 43. Heiden, about 13%, and Tinn, about 7%, are both very high swell. Together that is roughly 75% of the city on high or very high swell soil, and about half on the very high kind, against 44% and 27% for Williamson County overall.

Taylor has none of the limestone hills that shape Georgetown, Leander or Liberty Hill. It is flat prairie, where water drains slowly and clay stays wet for days after a storm, then cracks open in long dry summers. Swell values on the card are county figures for each series.

Soil card · Taylor (Williamson County)

High-swell ground

44%

of county land in high or very high shrink-swell soils

Annual rain

33.7 in

NOAA 1991–2020 normal, Andice 2 Sw

Dominant soil

Branyon

Branyon

30% of the city · plasticity index 42

Very High swell

Burleson

25% of the city · plasticity index 43

High swell

Heiden

13% of the city · plasticity index 40

Very High swell

Tinn

7% of the city · plasticity index 41

Very High swell

Sources: USDA NRCS Soil Survey (SSURGO), NOAA climate normals. How we use this data

Homes by age · Taylor

Median home built 1979

Built before 1960

26%

Built 1960–1979

26%

Built 1980–1999

23%

Built 2000 or later

26%

Source: U.S. Census Bureau, American Community Survey 5-year estimates.

Taylor's older homes

About 26% of Taylor homes predate 1960 and another 26% were built from 1960 to 1979. The median year built is 1979, 27 years older than Williamson County’s 2006. Taylor grew as a railroad and cotton town, and many of its older houses are pier and beam, with wood floors on posts, blocks or piers over a crawl space. On Branyon and Burleson clay, those supports get pushed up and dropped every year, and old wood rots. Floors slope, bounce or pull away from baseboards.

The usual fix is re-shimming, resetting or adding piers, and replacing rotted sills or beams. Re-leveling a pier and beam house in Texas often runs $5,000 to $15,000. See pier and beam repair. About 25% of homes went up in 2000 or later, mostly post-tensioned slabs, and new construction is picking up as large employers build in the area.

Signs to watch in a Taylor home

Repairs on Blackland clay

For slab homes, contractors usually drive pressed concrete or steel piers under the perimeter beam until they stop at firm soil, which on clay this deep can take some depth. Drainage belongs in every plan: gutters, long downspout extensions and grading that moves water away. In a long dry spell, steady, moderate watering near the slab helps keep the clay from shrinking.

Typical Texas ranges: $3,300 to $7,000 for a few piers, $4,000 to $6,000 for a moderate repair, and $10,000 to $30,000 or more for widespread settlement with drainage. See the cost guide. Partner pier work carries a lifetime transferable warranty. Ask your contractor whether the city requires a permit. Nearby: Hutto and Georgetown.

The Texas Tough Method

How Texas Tough works with you

01

Tell us what you're seeing

Call or send photos. We help sort cosmetic from structural first.

02

Free, no-pressure inspection

A vetted local partner measures the house and writes up an estimate.

03

Read the estimate with us

Pier count, pier type, drainage and warranty terms in plain English.

04

Repair and follow-up

Pier work carries a lifetime transferable warranty, and we check in afterward.

Repairs are performed by independent, vetted partner contractors. How it works

Questions locals ask

Taylor foundation repair FAQ

The statewide ranges apply: many moderate slab repairs run $4,000 to $6,000, and pier and beam re-leveling often runs $5,000 to $15,000. Compare written estimates.

Usually, yes. Slab pier work is outside, and pier and beam work happens from the crawl space.

No. Expect to disclose known foundation issues and earlier repairs when you sell in Texas. Old repair receipts and a warranty that transfers go a long way with buyers.

Any time works. Many contractors avoid leveling at the dry end of summer or right after heavy storms.

Not sure if it's serious?

Taylor homeowner? Start with a call.

Tell Texas Tough what you’re seeing and what kind of house you have. If it’s minor, we’ll say so. If not, we’ll set up a free, no-pressure inspection with a vetted contractor near Taylor. Repairs are performed by independent, vetted partner contractors.